Traverse the base of the Snootli crag, continuing East and up for ~10 minutes to an attractive wall with several crack lines. Easy toproping setups for every line via 4 sets of anchors.
A good place to learn gear climbing.
From right-to-left:
1) Jimminy Cricket - 5.9 - climb a thin crack to a junction with Frog Prince; continue up the right-hand slab to a juggy flake. Small cams and nuts, 1 bolt.
2) Frog Prince - 5.8 - climb the left-leaning finger crack to a slab finish, small cams and nuts.
3) Rapunzel - 5.11 - boulder the slab crux right off the ground, gaining an easier crack to a slab finish. Small cams and nuts.
4) Goldilocks - 5.10 - an easy crack start leads to thin climbing through unique water-groove features; easier face climbing to the top. A couple small cams with 4 bolts protecting the cruxes.
5) Tinkerbell - 5.11+ - slab to disappearing-crack to hard face climbing; fun crux face moves overcoming the slight bulge mid-route, riddled with subtle dyke features; easier slab moves to the top. 4 bolts plus a couple small pieces.
6) Captain Hook - 5.12? - hard face climbing just left of Tinkerbell. Toprope project.
7) Bean Stalker - 5.11+ - fun and varied climbing up a series of cracks and face features; a hard lower crux above good gear, with some finesse sequences up higher. Many small wires, small cams, and one medium piece.
8) Quasimodo - 5.11 - keep the good times going with this long and varied climb! Climb the crux of Bean Stalker, then traverse left on good holds to gain a beautiful double-crack that takes you all the way to the anchors. Fun moves on decent holds. Bring a range of small cams and some wires.
9) Kung-fu Panda - 5.11 - exciting and sustained climbing up a striking crack at the left edge (tallest part) of the wall. Short boulder problems with good rests and gear where you need it. Gear to 2" - and remember small wires for the top.
10) Quetzalcoatl - 5.12? - dramatic line up the arete on the far left of the wall. Hard face climbing past 6 bolts, to larger holds in a spectacular position. 8 bolts plus a couple small cams for the mid-section. Open project.